LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2724 (Engine - Special Tools -- E90) >> Engine >> 119260 Holder >> Holder Minimum set: Mechanical tools MW >> SI number

SI number

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

01 01 01 (662)

Consisting of:

1 = 0494034 Holder

NOTE: (Individual counter support)

2 = 0494035 Screw

NOTE: (Bolt (thread M10) with washer) For screwing counter support

3 = 0494129 Bush

NOTE: (Bush for counter support) For counter support, for retaining flywheel when gearbox is removed Engine: N62, N73

4 = 0494130 Screw

NOTE: (Bolt (thread M12)) For counter support for retaining flywheel when gearbox is removed

5 = 0494793 Bush

6 = 0495216 Bush

Fig 1: Identifying Holder (119260)
G04739157Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: For counter support, for retaining flywheel when gearbox is removed Engine: M57TU2