3540001 Removing and installing or replacing accelerator pedal module

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

Take off cap.

Release screw.

Pull accelerator pedal module upwards out of fixture.

Installation:

Tightening torque 35 40 1AZ .

Fig 1: Pulling Accelerator Pedal Module

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off plug (1).

Remove accelerator pedal module.

Fig 2: Identifying Accelerator Pedal Module Plug

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Accelerator pedal module can only be replaced completely with adapter plate.