Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove FRONT AUXILIARY TURN SIGNAL LIGHT

Unlock retaining lug (1).

Turn bulb holder (2) in direction of arrow and remove from auxiliary direction indicator (3).

Pull bulb out of holder (2).

Installation:

Retaining lug (1) must not be damaged.
Make sure bulb holder (2) is correctly engaged in auxiliary turn indicator (3).

Fig 1: Identifying Retaining Lug, Bulb Holder And Auxiliary Direction Indicator
Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Note BULB TYPE .