Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove REAR LIGHT
Detach sealing frame for rear light (1) completely from rear light (2).
Clean bonding surface and allow to dry.
Installation:
Make sure sealing frame for rear light (1) is correctly bonded all round on rear light (2).