Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove FRONT WHEEL ARCH COVER (front section)

Disconnect plug connection (1).

Unfasten screws (2).

Remove fog lamp (3) towards rear from bumper trim (4).

Fig 1: Identifying Plug Connection, Screws And Fog Lamp

Courtesy of BMW OF NORTH AMERICA, INC.

Version with M Technic aerodynamic kit:

Disconnect plug connection (1).

Unfasten screws (2).

Remove fog lamp (3) towards rear from bumper trim.

Installation:

Tab (4) of fog lamp (3) must be correctly seated in holder (5).

Fig 2: Identifying Plug Connection, Screws, Fog Lamp And Fog Lamp Tab

Courtesy of BMW OF NORTH AMERICA, INC.