Necessary preliminary work
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Headlight removed for purposes of clarity.
Unlock both retaining tabs and remove protective cap (1) in direction of arrow from headlight (2).
Installation note:
Protective cap (1) must be correctly engaged.
Check seal.
Replace protective cap (1) if necessary.
Observe NOTES FOR REPLACING THE PROTECTIVE CAP .
Disconnect plug connection (1).
Unlock spring wire clip (2) and fold downwards.
Remove ignition unit for xenon headlight (3) from headlight (4).
Installation note:
Make sure ignition unit (3) is exactly seated on headlight (4).