Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove FRONT LEFT WHEEL ARCH COVER
Release screws (1).
Tightening torque 63 12 5AZ .
Remove drive for adaptive headlight (2) from headlight (3).
IMPORTANT:
Drive for adaptive headlight (1) is engaged in housing (3).
Installation:
Fit drive for adaptive headlight (1) exactly on headlight.
Make sure pin housing (2) is correctly seated.
Carry out VEHICLE PROGRAMMING/ENCODING .