LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2716 (Airbag, Audio, Navigation And Anti-Theft - Repair - E90) >> 6581 On-Board Computer >> 6581060 Removing and installing/replacing outside temperature sensor >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect plug connection (1).

Snap out outside temperature sensor in direction of arrow and remove.

Installation: 

Outside temperature sensor must audibly snap into place.

Check for secure seating after fitting.

Fig 1: Identifying Plug Connection
G04753749Courtesy of BMW OF NORTH AMERICA, INC.