Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Release screws (1).
Tightening torque 52 24 01AZ .
Tilt backrest forwards and lift backrest with guides (2) out of partition wall.
Installation:
Make sure guides (2) on left and right are correctly seated in partition wall.
Remove head restraints See 5224388 REMOVING AND INSTALLING/REPLACING REAR MIDDLE HEAD RESTRAINT or 5224390 REMOVING AND INSTALLING OR REPLACING LEFT OR RIGHT REAR HEAD RESTRAINT .
Cover door sill with protective cover (risk of damage).
Lift out backrest and feed out of seat belts.