6762000 Removing and installing/replacing flat motor for front left or right power window unit: Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove POWER WINDOW UNIT in front door
Release screws (1).
Tightening torque 67 62 1AZ .
Detach flat motor for power window unit (2) from power window unit and remove.
Installation:
Fit flat motor for power window unit (2) exactly on teeth of power window unit.
Carry out function check (one-touch function, anti-trapping protection and, if necessary, comfort function).