LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2709 (Electrical Drives - Repair - E90) >> 6731 Drive, Seat Adjustment >> 6731521 Removing and installing/replacing drive unit for seat height adjustment >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Unlock plug connections (1) and disconnect.

Unfasten screws (2).

Remove drive unit for seat height adjustment.

Installation: 

Make sure drive shaft is correctly seated in gearbox.

Fig 1: Identifying Plug Connections And Screws
G06852184Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals