LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2709 (Electrical Drives - Repair - E90) >> 6716 Servo/Positioning Drives >> 6716011 Removing and installing/replacing left vertical aim adjuster (xenon headlight) >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For purposes of clarity, following illustrations show headlight removed.

Release catches (1) and remove protective cap (2).

Fig 1: Identifying Catches And Protective Cap
G04727718Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Turn vertical aim adjuster (2) to left and feed out of fixture.

Fig 2: Identifying Plug Connection And Vertical Aim Adjuster
G04727719Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Slide headlight insert (1) upwards in direction of arrow.

Fig 3: Sliding Headlight Insert Upwards In Direction Of Arrow
G04727720Courtesy of BMW OF NORTH AMERICA, INC.

Feed ball head of vertical aim adjuster (1) into mounting (2).

Fig 4: Identifying Ball Head Of Vertical Aim Adjuster In Mounting
G04727721Courtesy of BMW OF NORTH AMERICA, INC.