Necessary preliminary tasks

• Remove GLASS SLIDE/TILT SUNROOF LID 
• Remove RAIN GUTTER 
• Remove WIND DEFLECTOR 

Slide connecting element (1) back.

Fig 1: Sliding Connecting Element

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out garage stop (1) with a screwdriver.

Fig 2: Removing Garage Stop Using Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Advance connecting element (1) up to opening (2).

Fig 3: Moving Connecting Element Up To Opening

Courtesy of BMW OF NORTH AMERICA, INC.

Lever control lever (1) out of guide rail and turn.

Fig 4: Turning Control Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Advance connecting element (1) up to end fitting.

Raise connecting element (1) and slide forwards out of guide.

Feed connecting element (1) out of carriage.

Fig 5: Removing Connecting Element Out Of Carriage

Courtesy of BMW OF NORTH AMERICA, INC.

Carriage (1) for connecting element in guide rail.

Fig 6: Identifying Carriage Of Guide Rail

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Keep to sequence of installation.

If necessary, move carriage towards rear slightly.

Insert connecting element (1) into guide rail.

Fig 7: Inserting Connecting Element Into Guide Rail

Courtesy of BMW OF NORTH AMERICA, INC.

Engage connecting element (1) in carriage (2).

Turn control lever (3).

Fig 8: Turning Control Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Insert control lever (1) in opening.

Fig 9: Inserting Control Lever In Opening

Courtesy of BMW OF NORTH AMERICA, INC.

Move connecting element towards rear.

Clip in garage.

Assemble glass slide/tilt sunroof and carry out function check.

INITIALIZE  glass slide/tilt sunroof.

Fig 10: Locating Spacer Of Control Lever

Courtesy of BMW OF NORTH AMERICA, INC.