Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove GLASS SLIDE/TILT SUNROOF LID
Detach seal (1) from glass slide/tilt sunroof lid (2).
Installation:
Coat guide channel (1) and seal (2) with soapy water.
Begin installation at rear middle, with sealing joint (3).
Do not pull seal too tightly in radii (leakage).