2232001 Replacing rubber mount for transmission mounting
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove rear underbody protection.
- Support transmission with lifter.
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Remove rubber mount from transmission crossmember. Tightening torque 24 71 1AZ/2AZ .
NOTE:
Illustration similar.