2152510 Removing and installing or replacing clutch slave cylinder: Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

Clean thrust member (1) and contact face on release lever (2).

Lightly grease thrust member (1) on contact face (3).

Grease, refer to OPERATING FLUIDS .

Fig 1: Identifying Thrust Member And Contact Face On Release Lever

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Spacer between fuel line and pressure hose of clutch slave cylinder must be correctly fitted.

Fig 2: Identifying Spacer Between Fuel Line And Pressure Hose Of Clutch Slave Cylinder

Courtesy of BMW OF NORTH AMERICA, INC.