1122513 Replacing roller bearing for dual-mass flywheel (version 1): Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Flywheel removed!

Position special tool 11 2 010 in roller bearing.

Twist out roller bearing with special tool 11 2 343.

Fig 1: Twisting Roller Bearing With Special Tool 11 2 343

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble special tools 11 2 350 and 00 5 500 .

Drive in roller bearing with special tools 11 2 350 and 00 5 500 in direction of arrow as far as it will go.

Fig 2: Installing Roller Bearing Using Special Tools 11 2 350 And 00 5 500

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.