3135005 Removing and installing/replacing push rod (stabilizer link) for left/right stabilizer

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335i, 2010 BMW 328i, and 2010 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Note (M3 only):

Make sure stabilizer link is installed in correct position.

Connection, stabilizer link to spring strut
Connection, stabilizer link to stabilizer

Fig 1: Identifying Connections Of Stabilizer Link To Spring Strut And Stabilizer Link To Stabilizer
Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove bracket for brake hose.

Release nut (3) and remove stabilizer link (2).

Installation:

Replace self-locking nuts.

Tightening torque 31 35 2AZ .

Fig 2: Identifying Nuts For Brake House Bracket And Stabilizer Link

Courtesy of BMW OF NORTH AMERICA, INC.