Automatic only

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screw.

Detach cooler (1) for automatic transmission from fan cowl (2).

Fig 1: Locating Cooler Screw

G04725846

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock hose (1) and detach.

Release nut and remove bracket (2) for remove bracket for muffler.

Fig 2: Locating Bracket Nut

G05758956

Courtesy of BMW OF NORTH AMERICA, INC.

Release, unlock and disconnect plug connection (1) in direction of arrow from fan cowl.

Detach cable strap (2) from fan cowl.

Release screw.

Installation:

Make sure cable guide (3) is installed in correct position between fan cowl and radiator.

Fig 3: Disconnecting Plug Connection From Fan Cowl

G05758957

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug (1) and remove.

Unclip line (2) from fan cowl.

Unlock catch in direction of arrow.

Remove fan cowl towards top.

Fig 4: Removing Plug And Line From Fan Cowl

G05758958

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure fan cowl (1) and bracket (2) are in correct installation position.

Fig 5: Identifying Fan Cowl And Bracket

G05758959

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Check stored fault messages.
Now clear the fault memory.