1700039 Venting and filling cooling system with vacuum filling unit: Recycling

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Observe country-specific waste disposal regulations.

IMPORTANT: Check all the coolant hoses before filling the cooling system with the vacuum filling unit.
If necessary, replace damaged and porous coolant hoses.

Fig 1: Identifying Filling Cooling System With Vacuum Filling Unit Components

Courtesy of BMW OF NORTH AMERICA, INC.

1) Filling unit with vacuum meter and shut-off valves
2) Filler hose
3) Coolant container
4) Venturi nozzle
5) Compressed air connection (max. 6 bar)
6) Outgoing-air hose (lead outgoing-air hose into a collecting container)