2435700 Removing and installing/replacing input and output speed sensor (GA6L45R)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2010 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
After completion of work, check TRANSMISSION FLUID LEVEL .
Failure to comply with this instruction will result in serious damage to the transmission.
Use only the approved transmission fluid: Dexron VI automatic transmission fluid ; BMW part number 83 22 0 397 114 (4 liters)
Failure to comply with this instruction will result in serious damage to the transmission.
Necessary preliminary tasks:
- Remove MECHATRONICS
Unlock and disconnect plug (1).
Release screws (2).
Detach input and output speed sensor from mechatronics.
Tightening torque 24 30 4AZ .