Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove FRONT UNDERBODY PROTECTION

NOTE: Prior to removing, pay attention to the exact installation position with respect to the adjoining components.

Release screws (1).

If necessary, remove underbody protection bracket.

Release catches (2) and feed out radiator seal (3) towards rear.

Fig 1: Removing Radiator Seal With Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) must not be damaged

Fig 2: Identifying Catches

Courtesy of BMW OF NORTH AMERICA, INC.