5171... Removing and installing/replacing left/right reinforcement cover

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release bolt (1) on front assembly underside protection.

Release screws (3) and nuts (4).

Remove reinforcement cover (2).

Installation:

Make sure reinforcement cover (2) is correctly seated.

Fig 1: Identifying Reinforcement Cover With Screws, Nuts And Bolts

Courtesy of BMW OF NORTH AMERICA, INC.