LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2701 (Body Equipment - Repair - E90) >> 5147 Floor-LUGG.Comp.-Eng.Comp.Tr.Panels >> 5147491 Removing and installing/replacing rear underbody protection >> Two-part underbody protection

Two-part underbody protection

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Detach underbody protection (2) from bracket (3) and remove.

Installation: 

Ensure correct seating.

Centre underbody protection (2) and tighten down screws (1).

Fig 1: Removing Underbody Protection From Bracket
G04726249Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals