LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2701 (Body Equipment - Repair - E90) >> 5147 Floor-LUGG.Comp.-Eng.Comp.Tr.Panels >> 5147491 Removing and installing/replacing rear underbody protection >> Single-part underbody protection (except E90/E91/E92 AWD)

Single-part underbody protection (except E90/E91/E92 AWD)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Pull underbody protection (2) in direction of arrow out of bracket (3).

Installation: 

Ensure correct seating.

Centre underbody protection (2) and tighten down screws (1).

Fig 1: Removing Underbody Protection From Bracket
G04726248Courtesy of BMW OF NORTH AMERICA, INC.