51 34 426 Replacing the left or right window guide rail cover

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove outer WINDOW CAVITY COVER STRIP

Version without roller sunblind:

Remove COVER ON DOOR WINDOW FRAME

Version with roller sunblind:

Remove ROLLER SUNBLIND ON PERMANENT SIDE WINDOW

Pull rubber guide (1) out of cover (2).

Fig 1: Pulling Rubber Guide Out Of Trim

G04767900

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Follow the INSTRUCTIONS FOR BONDING SOUND INSULATION .

Open sound insulation (1) in area (A).

Release screw (2) behind the sound insulation (1).

Hold cover and undo screws (3).

Fig 2: Identifying Acoustic Insulation And Screws

G06202701

Courtesy of BMW OF NORTH AMERICA, INC.

Push cover (1) downwards from rubber guide (2) and remove towards top.

Installation note:

Make sure rubber window seal (2) is correctly seated on cover (1).

Fig 3: Removing Trim

G04767902

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Threads (1) of cover (2) must not be damaged.

Fig 4: Identifying Threads Of Trim

G04767903

Courtesy of BMW OF NORTH AMERICA, INC.