LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2701 (Body Equipment - Repair - E90) >> 5131 Front And Rear Window >> 5131021 Removing and installing/replacing rubber frame for windscreen (top) >> Replacement of rubber frame with removed or new windscreen

Replacement of rubber frame with removed or new windscreen

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

There is no sealing lip (2) in area (A) on left/right.

Fit rubber frame (1) with tear-off lip (4).

After installing windscreen: If necessary, pull liner* off adhesive tape (6) and press rubber frame (1) down firmly on roof outer skin.

  1. 3 Butylene tape
  2. 5 Aluminium strip

    * Liner is the protective film on adhesive tape (6).

    Fig 1: Identifying Sealing Lip, Rubber Frame, Tear-Off Lip And Aluminium Strip
    G05503861Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals