LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2701 (Body Equipment - Repair - E90) >> 5131 Front And Rear Window >> 5131... Notes for bonding sound insulation (SI), doors >> Handling adhesive area on inner door panel

Handling adhesive area on inner door panel

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
INNER DOOR PANEL ADHESIVE AREA HANDLING CHART

Adhesive Cleaning
  1. Butyl bead applied to sound insulation with protective film
  2. Butyl mini-round profile 3 mm from the roller
  3. Butyl round profile 6 mm from the roller
  1. Isohexane (benzine)
  2. 2-propanol (isopropanol)

    Under no circumstances: paint thinning 

  3. Carry out bonding only after an air drying time ≥ 1 min. Air drying time may be omitted if the entire bonding surface is wiped with a dry cloth
  4. After cleaning, the bonding surface may not be touched with hands or fouled again
scientia non olet · About LEMON Manuals