5124145 Removing and installing/replacing button for rear lid actuation: Notes

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Slide special tool 00 9 323 under the front edge of button (1) and lift button (1) out.

Pull button (1) out of rear lid (2).

Fig 1: Pulling Out Rear Lid Button

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug (1) and remove button (2).

Installation:

Perform function check with rear lid open.

Fig 2: Identifying Plug And Button

Courtesy of BMW OF NORTH AMERICA, INC.