5123160 Removing and installing/replacing arrester hook on engine hood

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Raise bonnet/hood lid.

Release screws (1) and remove arrester hook (2).

Tightening torque 51 23 1AZ .

Fig 1: Identifying Arrester Hook And Screws

Courtesy of BMW OF NORTH AMERICA, INC.