Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove COVER ON OUTSIDE DOOR HANDLE

Pull out outside door handle (1) and feed out in direction of arrow.

Fig 1: Removing Outside Door Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guide (1) and locators (2) must not be damaged.

Fig 2: Identifying Guide And Locators

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seals (1 and 2) must not be damaged.

If necessary, pull lock actuator (3) outwards until it engages retaining clasp (4).

Install outside handle and insert correctly into lock actuator (3).

Outside handle is in the correct position only after the cover has been fitted on the outside handle.

Carry out function check only with door open.

Fig 3: Identifying Seals, Lock Actuator And Retaining Clasp

Courtesy of BMW OF NORTH AMERICA, INC.