Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove DOOR MIRROR
IMPORTANT:
If reusing the existing window cavity cover strip (1), make sure it is not bent.
Lever out window cavity cover strip (1) with special tool 00 9 324 (starting at A-pillar).
Feed window cavity cover strip (1) at rear out of guide (2) and remove.
Installation:
Moisten window cavity cover strip (1) prior to fitting with APPROVED ANTI-FRICTION AGENT .
Window cavity cover strip (1) must be flush at front to door edge.
Version with Chromeline:
Installation:
If chrome strip (2) has been pulled out of cover strip (3), both parts must be reassembled.
Feed guide (1) of chrome strip (2) into groove (3) of window cavity cover strip (4).