Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Apply parking brake
Move selector lever into N position
Remove GAITER for shift block

Partially fit special tool 00 9 340 as illustrated.

Lever out trim (1) all round.

Disconnect associated plug connections and remove trim (1) towards top.

Fig 1: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on trim (2) must not be damaged.

Make sure catches (1) are correctly seated in associated mountings of trim (2).

Fig 2: Identifying Catches On Trim

Courtesy of BMW OF NORTH AMERICA, INC.