Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove REAR BUMPER TRIM
If necessary, release exhaust system suspension elements

Release screws (1) on both sides.

Unclip cable from fixture.

Remove trailer tow hitch support member (2).

Disconnect all plug connections.

Tightening torque 71 60 1AZ .

Fig 1: Identifying Screws And Trailer Tow Hitch Support Member

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Only vehicles up to production date 07 March 2005:

Knock out studs (1) towards inside and replace with M12x40 hexagon bolts.

Tightening torque 71 60 1AZ .

Fig 2: Knocking Out Studs Towards Inside

Courtesy of BMW OF NORTH AMERICA, INC.