Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove front BUMPER TRIM
Remove fanfare horn See 6133055 REMOVING AND INSTALLING/REPLACING RIGHT FANFARE HORN or 6133050 REMOVING AND INSTALLING/REPLACING LEFT FANFARE HORN on left/right

Release screw (1) on cooling air guide (2) on left and right.

Depending on engine version, release screws in area (A).

Remove cooling air guide (2) on left and right.

NOTE: The following work step ends here:

"Removing and installing cooling air guide".

Fig 1: Identifying Screw On Cooling Air Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Release nuts (2) and blind rivets (3).

Installation:

Blind rivets (3) are not refitted.

If necessary, feed out cable and remove carrier (4).

Tightening torque 51 11 2AZ .

Fig 2: Identifying Blind Rivets With Screws And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.