LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2701 (Body Equipment - Repair - E90) >> 5111 Front Bumper >> 5111... Installing/replacing number/license plate (without base) >> Thread repair

Thread repair

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Drill out defective hole in bumper (2) to 9.5 mm diameter.

Insert blind rivet nut (1)*.

Secure car registration number plate (3) with car registration number plate (4)*.

Tightening torque 51 11 4AZ .

NOTE: * Sourcing reference: BMW Parts Department
Fig 1: Identifying Rivet Nut, Car Registration Number Plate And Defective Hole In Bumper
G04752436Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals