4. Preparations

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Heat and remove anti-friction agent residues with a hot air blower or clean new part thoroughly
Immediately prior to fitting, clean the work area with spirit in order to remove silicone and grease residues

NOTE: Air drying time approx. 1 minute