3611523 Removing and installing/replacing an RDC trigger transmitter (rear)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2011 BMW 323i, 2010 BMW 335xi, 2010 BMW 335i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Partially detach rear WHEEL ARCH TRIM

After installation:

Carry out RESETTING of RDC

Disconnect plug connection (1).

Release screws (2) and remove trigger transmitter.

Fig 1: Identifying Trigger Transmitter Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

E90 and E91 from 09/2008:

Disconnect plug connection (1).

Press holder (2) together and detach trigger transmitter (3) towards front.

Fig 2: Identifying Trigger Transmitter With Holder And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.