3611121 Removing and installing/replacing an RDC trigger transmitter (front)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2011 BMW 323i, 2010 BMW 335xi, 2010 BMW 335i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Partially detach front WHEEL ARCH TRIM
Press through studs (1) of expander rivets towards rear.
Remove trigger transmitter (2).
Installation:
If necessary, replace expander rivets.
After installation
- Carry out RESETTING OF RDC