1231009 Checking alternator (BSD): Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Correct connections on charged battery
- Correct connections on alternator and starter motor
- Good ground connection between engine and body
- Tensioned ribbed V-belt
- Read out DME/DDE fault memory.
NOTE:
The alternator with BSD interface can communicate with the engine control unit (DME/DDE).
The alternator is not connected to the charge telltale light.
The alternator can identify various faults.
The alternator is not connected to the charge telltale light.
The alternator can identify various faults.
BSD alternator can be recognized by the plug connection on the alternator.
Connect diagnosis tester.
- Function selection
- Complete vehicle
- Drive
- Voltage and current regulation
- Voltage and current generation
- Alternator
- Follow instruction in diagnostic program