1123010 Removing and installing or replacing vibration damper (M51)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Detach front underbody protection.
Remove DRIVE BELT .

Release screws (1).

Tightening torque: 11 23 1AZ .

Remove vibration damper (2).

Fig 1: Identifying Vibration Damper With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.