7214... Removing and installing/replacing Top Tether eyelets for child seat

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Two or three Top Tether eyelets are installed, depending on the model.

Lever out covers (1) and release screws underneath.

Remove Top Tether eyelets (2).

Tightening torque 52 24 03AZ .

Fig 1: Identifying Covers And Top Tether Eyelets

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Ensure Top Tether eyelets (1) are in correct installation position.
It must be possible for Top Tether eyelets (1) to be tilted in the direction of head restraints (2).

Fig 2: Identifying Top Tether Eyelets And Head Restraints

Courtesy of BMW OF NORTH AMERICA, INC.