LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2695 (Heating And Air Conditioning - Repair -- E90) >> 6411 heater with operation >> 6411905 Removing and installing/replacing ventilation temperature sensor

6411905 Removing and installing/replacing ventilation temperature sensor

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Pull temperature sensor (1) out of retaining lug (2).

Installation: 

Make sure rubber ring is correctly seated.

Fig 1: Identifying Temperature Sensor And Retaining Lug
G04753610Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove temperature sensor (2).

Fig 2: Identifying Plug Connection And Temperature Sensor
G04753611Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals