6411850 Replacing servodrive for rear compartment flap
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Servomotors must be re-addressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
- Body
- Heating and A/C function
- Flap motors
- Re-address flap motors
Necessary preliminary tasks:
- Remove TRIM FOR INSTRUMENT PANEL , bottom right
Unfasten plug connection (1) and disconnect.
Release screws (2).
Detach servodrive for rear compartment flap (3) in direction of arrow from heater/air conditioner (4).
Installation:
Place servodrive for rear compartment flap (3) exactly onto heater/air conditioner (4).