6411829 Replacing actuator drive of ventilation flaps
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove RIGHT GLOVEBOX WITH HOUSING
Unfasten plug connection (1) and disconnect.
Unfasten screws (2).
Detach servodrive for ventilation flaps (3) in direction of arrow from heater/air conditioner (4).
Installation:
Place servodrive for ventilation flaps (3) over guide pin (5).
Replacement:
Servomotors must be re-addressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
- Body
- Heating and A/C function
- Flap motors
- Re-address flap motors