6411212 Removing and installing/replacing heater/air conditioner fan

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM FOR INSTRUMENT PANEL , bottom right
Partially release air duct at side

Disconnect plug connection (1).

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise lug (1) and feed out housing (2) by turning clockwise.

Installation:

Lug (1) must not be damaged and must snap audibly into place.

Fig 2: Turning Lug And Housing

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Replace CONTROLLER FOR HEATER/AIR CONDITIONER FAN