8621... Removing rotary striker lock: Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
The following text describes how to remove the rotary striker lock on the rear lid as an example. Proceed in the same way for the side lids. Remove the lock while the lid is open.
Release screws (1) and remove cover (2). On rear lid, remove red cap (3).
Installation, rear lid only:
Place red cap back on pull rod. Red cap serves to indicate rear lid emergency unlocking facility.
Remove spring nut (1) from pull rod (2).