8621... Removing roof railing: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Check molded sealing parts for faults and replace if necessary. Pay attention to identification of molded sealing parts and position accordingly.
Check butylene tape seal.
Use new screws. Coat all screws with OKS 90 thread locking adhesive.
First screw down railing adapter in middle. Then press roof railing downwards with a force of approx. 50 N. Then screw down railing adapter at front and rear.
Tightening Torque for roof railing at front and rear, 86 21 1AZ .
Tightening Torque for roof railing in middle, 86 21 2AZ .