8621... Removing gas spring: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Push retaining clip (1) back into its original position. Press spring head (3) onto ball pivot until spring head (3) snaps audibly into place.

Fig 1: Pushing Gas Spring Head

Courtesy of BMW OF NORTH AMERICA, INC.