8621... Adjusting side lid to fit: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Tightening Torque, 86 21 7AZ .

Fig 1: Moving Side Lid

G04766460

Courtesy of BMW OF NORTH AMERICA, INC.

Depth adjustment of side lid:

Release screws (1) and move side lid in direction of arrows.

Tightening Torque, 86 21 7AZ .

Fig 1: Moving Side Lid

G04766461

Courtesy of BMW OF NORTH AMERICA, INC.

Adjust gap (A) evenly all around and correct if necessary.

Fig 2: Adjusting Gap

G04766462

Courtesy of BMW OF NORTH AMERICA, INC.

Check lid in transition (B) to hood for displacement and correct if necessary (flush).

Fig 3: Checking Lid In Transition

G04766463

Courtesy of BMW OF NORTH AMERICA, INC.

To align lid in direction of travel, you can install or remove a spacer plate (3) between mounting bracket (1) and hinge (2).

Fig 4: Identifying Mounting Bracket With Spacer Plate And Hinge

G04766464

Courtesy of BMW OF NORTH AMERICA, INC.

Check lid in transition (C) to hood for displacement and correct if necessary (flush). Correction is made by inserting or omitting spacer plates (refer to Fig 4).

Fig 5: Checking Lid In Transition

G04766465

Courtesy of BMW OF NORTH AMERICA, INC.